Why trust you figure skate sharpening to a part time hockey dad or an unknown rink employee? Wouldn't you rather trust an expert who's full time business (and investment) it is to know about all figure skate blades? 

Sharpening figure skates is totally different than sharpening hockey skates. Just look at old hockey skate blades and you will see how the rocker has been changed. While this is acceptable, and sometimes desirable for hockey skates, it is NOT ACCEPTABLE and will RUIN your figure skate blades. The geometry of figure skate blades is very important to a skaters success, and poor sharpening can severely impair a skaters performance. 

Are your edges even? are they the proper radius of hollow for your size and level? Do you even know what the radius measurement is? has the rocker been altered?  If your current sharpener cannot answer these questions, you need us.

Why are we the best at sharpening?

1. We own and maintain our equipment and keep it in top condition. Old, worn equipment causes "chatter" and a rough finish. We have a personal investment in our equipment, unlike the typical "rink" machines and their employees.
2.  We check and verify that every skate has even edges. We do this AFTER the skate has been completely ground exposing all new metal. AND we do this in the skate holder. No skate even comes out of the skate holder, much less makes it onto the ice, unless it meets our accuracy parameters.
3. The radius of our sharpeners are checked and "proofed" often. Our 5/8" hollow is really a 5/8" hollow. We have proofing gauges to verify you are getting what you ask for. Can anyone else say that?
4.  We deburr the edges with the finest grade ceramic hones. Nothing creates smoother edges.
5.  We guarantee we will not alter the rocker of the blades. If you have ever seen hockey blades after many sharpenings, you would realize how different the sharpening process is.
6.  We have years of experience with high level figure skaters and coaches and the relationship between skater/blades/edges/ice which is critical to a skaters success.
6.  Questions? Ask away. We can answer any and all questions.

YES, we can sharpen paramount blades, matrix blades, parabolic blades and stainless steel blades. 

The more expensive the blades, the more important it is to have someone who has the EXPERIENCE to do it right.

About Radius of hollow:

WHILE IT HAS BEEN DESCRIBED AS A GROOVE, A HOLLOW GRIND, OR A GROUND RADIUS, YOU COULD REFER TO IT AS FOLLOWS:

"I AM SKATING ON A 5/8" RADIUS"

"YOUR SKATES HAVE BEEN SHARPENED TO A 1/2" RADIUS"

"WHAT RADIUS WOULD YOU LIKE GROUND ONTO YOUR BLADE?"

BY GRINDING A RADIUS INTO YOUR SKATE BLADE YOU ARE MAKING YOUR EDGES SHARP AND DEPENDING UPON THE RADIUS YOU CHOOSE, YOU ARE ALSO MAKING YOUR EDGES MORE (OR LESS) PRONOUNCED IN THE SHAPE OF A "TIP".

FROM GRADE SCHOOL MATH, YOU MAY RECALL THAT A 1" DIAMETER CIRCLE WILL HAVE A 1/2" RADIUS.

A 4" CIRCLE WILL HAVE A 2" RADIUS, A 3/4" DIAMETER CIRCLE WILL HAVE A 3/8" RADIUS, ETC,ETC.

CHOOSING A RADIUS CAN BE AS SIMPLE OR AS COMPLEX AS YOU (OR YOUR CUSTOMERS)CHOOSE TO MAKE IT.

THERE ARE MANY "EXPERTS" WHO DISAGREE ON SKATE SHARPENING. THERE ARE ALSO SOME SHARPENING OUTFITS THAT HAVE DEVELOPED SHARPENING PROCEDURES (GIMMICKS?) PRIMARILY AS MARKETING TECHNIQUES TO ATTRACT CUSTOMERS.

WITH THAT IN MIND, THE FOLLOWING DISCUSSION WILL ALLOW YOU TO EXPERTLY SHARPEN SKATES. YOU SHOULD ALSO BE ABLE TO FORM OPINIONS ON YOUR OWN.

TO BEGIN , LET'S LOOK AT WHAT DIFFERENT RADII LOOK LIKE ON THE BOTTOM OF YOUR BLADE. CLICK HERE TO DISPLAY FIG A.

AFTER A SKATE HAS BEEN GROUND IT WILL HAVE SHARP EDGES REGARDLESS OF HOW BIG OR SMALL THE RADIUS IS. KEEP IN MIND THAT THE LONG SPEED SKATING BLADES USED IN THE OLYMPICS ARE HONED FLAT WITH NO RADIUS. THEY ARE LOOKING FOR MAXIMUM GLIDE. WHILE THEY ARE CAREFUL IN THE TURNS, DON'T EVER DOUBT THAT THESE BLADE EDGES ARE NOT SHARP!

THE REAL QUESTIONS ARE:

"IS THERE ENOUGH EDGE ?"

"IS THERE TOO MUCH EDGE ?"

IF IMMEDIATELY UPON USE THE SKATER CLAIMS THE SKATE IS NOT SHARP ENOUGH, THEY ARE REALLY SAYING, "THIS SKATE DOES NOT HAVE ENOUGH EDGE ON IT TO SUIT MY SKATING".

HOW MUCH EDGE A SKATER CAN TOLERATE IS AFFECTED BY FOUR MAIN VARIABLES. THESE ARE THE SKATERS WEIGHT, THE SKATERS ASSIGNMENT, THE ICE TEMPERATURE, AND THE SKATERS SKILL LEVEL.

WARNING: THE FOLLOWING DISCUSSION IS GENERAL PURPOSE IN NATURE. YOU MUST FIND THE RIGHT SETTING(S) FOR YOUR NEEDS. SOLICIT AND ANALYZE FEEDBACK FROM THOSE YOU SHARPEN FOR.

WARNING: IN NO CASE SHOULD A RADIUS SMALLER THAN 1/4" BE ATTEMPTED. BESIDES BEING TOO SHARP FOR ANYONE, THIS WILL WEAKEN THE GRINDING WHEEL AND WILL CREATE A SAFETY HAZARD.

AN EXTREMELY LIGHT SKATER CAN TOLERATE VERY SMALL RADII (PRODUCING A DEEP HOLLOW AND LOTS OF EDGE). THEY DO NOT HAVE MUCH WEIGHT TO BEAR ON THE ICE.

PLEASE NOTE THAT BEGINNER LEVEL SKATERS CAN LEARN MOST SKILLS (PARTICULARLY THE HOCKEY STOP) EASIER BY GRINDING THEIR SKATES WITH A VERY LARGE RADIUS. AS THEY PROGRESS THE RADII IS DECREASED BACK TO A NORMAL LEVEL.

A HEAVY SKATER TRYING TO SKATE ON A SMALL RADIUS (TOO MUCH EDGE) WILL BITE INTO THE ICE SO HARD THAT THEY WILL HAVE TROUBLE STOPPING WITHOUT CHATTER OR GOING OVER THE TOP OF THEIR SKATES. THEY WILL ALSO LOOSE GLIDE TO EXCESS FRICTION AND BE WORKING HARDER. ON THE OTHER HAND, THEY WILL BE ABLE TO HOLD A VERY TIGHT TURN!

PROFESSIONALS CAN SKATE ON SMALLER RADII AS THEY HAVE THE COMBINATION OF LEG/ANKLE STRENGTH AND TALENT TO GET AWAY WITH IT.

SKATING ON TOO SMALL OF A RADIUS FEELS LIKE SKATING ON SOFT ICE.

WHILE 3/8" RADIUS EDGES ARE MORE PRONOUNCED THAN 5/8" THEY ARE ALSO MORE FRAGILE AND LESS DURABLE.

A "GENERAL PURPOSE" CHART FOR RADIUS BY WEIGHT IS AS FOLLOWS:

     VERY LIGHT    AVERAGE    HEAVY    HOCKEY GOALIE

        3/8"         5/8"      3/4"     1 TO 1 1/4"

HOCKEY: 1/2" SEEMS TO BE THE MOST COMMON RADIUS FOR KIDS THROUGH HIGH SCHOOL. FORWARDS GENERALLY PREFER SMALLER RADIUS THAN DEFENSE MEN OF THE SAME WEIGHT. GOALIES GENERALLY PREFER VERY LARGE RADIUS SO THAT THEY CAN "KICK OUT" WITHOUT CATCHING AN EDGE.

FIGURE: AGAIN THE KIDS (UNDER 60 LB's.) CAN SKATE ON A 1/2" RADIUS. A 5/8" RADIUS WILL TAKE CARE OF MOST RECREATIONAL SKATERS.

WHEN FIGURE SKATERS GET TO THE LEVEL WHERE THEY ARE IN A SERIOUS PROGRAM, THEY WILL BE UNDER THE GUIDANCE OF A COACH OR INSTRUCTOR. THE SKATER SHOULD CONSULT THESE PEOPLE FOR ADVICE ON THE BEST RADIUS FOR THE PROGRAM THEY ARE PERFORMING.

TIP: INDIVIDUALS CAN CALL THE SHOP THAT DID THEIR SKATES AND ASK "WHAT RADIUS ARE YOU GRINDING SKATES TO?" YOU CAN THEN SET YOUR MACHINE TO THE SAME SETTING AND GET YOUR SKATES DONE THE WAY YOU ARE CURRENTLY ACCUSTOMED.

SHARPENING SERVICES CAN CALL AROUND TO GET A FEEL OF WHAT THE OTHER SERVICES ARE OFFERING.

NOTE: INSTITUTIONS WHICH WILL NOT DIVULGE THE RADIUS SETTING OF THEIR SHARPENING TO THE SKATER ARE:

1. TRYING TO PROTECT THEIR BUSINESS.

2. DON'T KNOW.

PLEASE DON'T JOIN THE RANKS OF THESE SHARPENERS. SKATERS ARE STRIVING FOR CONSISTENCY! THEY NEED TO KNOW WHAT WORKS FOR THEM.

MOST RINK MANAGERS SHOOT FOR AN ICE TEMPERATURE OF APPROXIMATELY 25 DEGREES FAHRENHEIT. A TEMPERATURE OF 17 TO 23 DEGREES IS CONSIDERED "HARD HOCKEY ICE", 25 TO 26 DEGREES IS CONSIDERED GOOD FIGURE SKATE ICE. SLIGHTLY SMALLER RADIUS MAY BE USED ON COLDER/ HARDER ICE AND VICE VERSA.

Even Edges:

Note: These drawings are exaggerated for effect.